Upcoming video's

[Peter Tommasini]

Hi Guys,
As you may be aware, Victoria has been in stage 4 lock-down for a few months. The restrictions have been eased somewhat and we can now film videos again. I've decided to use a Austin Healey rear guard as a project for the upcoming filming.
Attached are some images in which I will explain in further detail when filming the upcoming video.
Stay tuned and look out for the videos.



Peter T.

[Blue62]

Peter'
Great to see that your side of the world is starting to loosen restrictions from the Covid.
Even greater to see that you are back in action.
As you probably remember I have attempted to make an Austin Healey rear guard a number of times.
I was never able to do it to my satisfaction.
So I am looking forward to this upcoming video.

[Moving molecules .]

Sounds Great Peter, my old workmate Mike Rodgers (67) ex Lynx is working at the Company above which have specialised in Austin Healey’s for many years , this place is 1.5 miles from my home.
The Weather looks like Paradise in the Video.... it’s damp and miserable here.

Looking Forward to your Professional Videos..... it’s great for our young apprentice and also l,m sure to learn something.

cheers Matt, my Boss Dan , & Toby from a damp U.K..👍

[Blue62]

Peter,
I have been looking at the pictures you posted here of the rear guard.
That guard must be from an early 100-4 as I noticed it has no joggle in the rear portion of the guard.

[Peter Tommasini]

Peter,
I have been looking at the pictures you posted here of the rear guard.
That guard must be from an early 100-4 as I noticed it has no joggle in the rear portion of the guard.

Yes David , it's an early car ...but the principle in making the guard will be the same, except... either putting the rear joggle in on the second piece or.....making a third piece, then put the joggle in , .then weld it on the rest

Peter T.

[Blue62]

Peter,
I was always trying to make it in three pieces.
I could never get the piece above the joggle to my satisfaction.
Maybe after your upcoming video I will be able to get it right

[Peter Tommasini]

Hi guys here some further photo's from the upcoming Austin Healey video. As mentioned before, stay tuned for the upcoming video.
I've also included a small sample of the return on the guard.
There are 5 photos attached, please click the link to view them all.

Peter T.

[Peter Tommasini]

Here the rear part of the guard blank cut out with all info needed
And NOOOOOOOOO!!!!!!!....... I am not going to make a FSP LOL ....... ( by the time the FSP is made I would have the rear section 80% finished )

[Chris_Hamilton]

Here the rear part of the guard blank cut out with all info needed
And NOOOOOOOOO!!!!!!!....... I am not going to make a FSP LOL ....... ( by the time the FSP is made I would have the rear section 80% finished )

Peter, probably my mind isn't working cause it's 3:30am here on the East Coast of the US now, so forgive me if this is a stupid question. What does
"P" and "MR" stand for or mean? Stared at the pic for a couple of minutes and couldn't figure that out.

Okay so looked at it again "MR" is middle radius correct? Still don't know what "P" is though.

[Moving molecules .]

P is for Profile Gauge Pete has made....😎

[Blue62]

Here the rear part of the guard blank cut out with all info needed
And NOOOOOOOOO!!!!!!!....... I am not going to make a FSP LOL ....... ( by the time the FSP is made I would have the rear section 80% finished )

What no FSP???? Are you out of the special tape??

[Moving molecules .]

Don’t start him off again.... LOL 😂 .... he is the most talented Professional willing to teach his Skills on Utube....

[Blue62]

Don’t start him off again.... LOL 😂 .... he is the most talented Professional willing to teach his Skills on Utube....

I just couldn't stop myself😂😂😂😂

[Peter Tommasini]

Peter, probably my mind isn't working cause it's 3:30am here on the East Coast of the US now, so forgive me if this is a stupid question. What does
"P" and "MR" stand for or mean? Stared at the pic for a couple of minutes and couldn't figure that out.

Okay so looked at it again "MR" is middle radius correct? Still don't know what "P" is though.

P stands for Profiles, middle of radius is correct
Peter

[Peter Tommasini]

Don’t start him off again.... LOL 😂 .... he is the most talented Professional willing to teach his Skills on Utube....

I like to teach the trade .I need to give back what I was taught ,simply because In my time 50 Years ago was lucky to learn from real tradesman. now days it can only be done via you tube, The Corona virus stops me from traveling over seas and teach + show all my new tools
Peter T.