Announcement

Collapse
No announcement yet.

Butt Welds and trim gaps

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by Moving molecules . View Post
    Click image for larger version Name:	DEA7251D-7386-43D6-8582-7C71F9B87D15.jpeg Views:	0 Size:	762.3 KB ID:	4070Click image for larger version Name:	F2FE1931-03FE-4BE8-8653-FDB1C9F81B60.jpeg Views:	0 Size:	950.2 KB ID:	4071Click image for larger version Name:	DF2EB84D-C534-4538-93B6-566292EC7BCE.jpeg Views:	0 Size:	2.48 MB ID:	4069Click image for larger version Name:	0DAAE32F-01EC-4CCA-B12C-1EEC15B6F67D.jpeg Views:	0 Size:	636.2 KB ID:	4067Click image for larger version Name:	15AADC14-3A57-4C42-8F96-3928B1799278.jpeg Views:	0 Size:	2.11 MB ID:	4068
    Are those magnets you are using?

    Comment


    • #32
      Click image for larger version

Name:	D563DC9A-6944-4F93-9EE2-8FAEDC6476E7.jpeg
Views:	52
Size:	511.6 KB
ID:	4101Click image for larger version  Name:	F7345953-0D15-4579-88EE-EAE9F73002F1.jpeg Views:	1 Size:	717.2 KB ID:	4098Click image for larger version  Name:	15901863-5B32-4B5A-981F-7AC74FF4B4B1.jpeg Views:	1 Size:	899.9 KB ID:	4100 Yes little magnets from EBay... great for paper patterns & checking to see if that little panel sits nicely on its own accord...

      But as we all have had experience with welding magnets ... magnets can cause havoc with TIG and MIG welding Arc.

      But if careful with spacing πŸ˜‰l now use 1” round strong magnets for Tacking up if you cannot use grips

      But my ideal method of clamping a panel is with modified vice grips .... with the tips welded together ... then cleaned up with 10mm belt file ... then cut through the weld cleanly.

      this creates a clamp like the ones with swivel feet but my ones are solid.

      So as long as you get your metal thickness right ... and have a very very slight Welding gap with TIG or mig you can guarantee a 100% finish on the back of the Panel .

      do you like the Blue PowerTec clamps???.

      May l also compliment you on your workmanship and your willingness to go that extra mile for the details.

      cheers Matt. UK
      Last edited by Moving molecules .; 09-01-2020, 08:49 PM.
      https://www.precisionpanelcraft.co.uk/

      Comment


      • #33
        May l also be bold to ask you for some help with our new TRUMF 501 PullMax.... Have a lot to learn about the tooling....πŸ‘πŸ˜‰
        https://www.precisionpanelcraft.co.uk/

        Comment


        • #34
          Matt, I've never used the blue PowerTec clamps, do you have them yourself?



          Thought I'd do a progression of pictures to show the carnage we started with on the hood brace to where it was painted this past weekend....




















          Note the wings left adjacent to the weld to act as heat sinks and prevent the edge from burning back...











          No Bog, just epoxy primer, basecoat, and clearcoat. Looks almost factory!!


          Comment


          • #35
            great work robert, always nice to see paint on, thanks for posting
            thanks neil

            Comment


            • #36
              Originally posted by MP&C View Post
              Matt, I've never used the blue PowerTec clamps, do you have them yourself?



              Thought I'd do a progression of pictures to show the carnage we started with on the hood brace to where it was painted this past weekend....




















              Note the wings left adjacent to the weld to act as heat sinks and prevent the edge from burning back...











              No Bog, just epoxy primer, basecoat, and clearcoat. Looks almost factory!!


              spot on work .... l love a thinker... Is that the right word not great with words....

              Yes Robert is Rob OK.... I have got a set of blue clamps ...... they’re Okkkk.... but I also modify them as well..... making the tag a bit thinner.πŸ˜‰.

              cheers Matt.... UK.

              https://www.precisionpanelcraft.co.uk/

              Comment


              • #37
                "No Bog, just epoxy primer, basecoat, and clearcoat. Looks almost factory!!"

                I bet it never looked as good then as it does now. Beautiful work!

                Cheers Charlie

                Comment


                • #38
                  Thanks Charlie!


                  So every time we place the hood on my folding stand, the hood skin deflects upward at those pressure points (corners). Which means that won't work for blocking out the hood. So lets' use the same supports that the hood uses and make a blocking "stand".

                  Large 5/8" bolt through the hood latch hole for supporting the nose...





                  And going through our scrap inventory, here's some tubing we used for the back end, bolted into the hinge support. The extra "feet" help to stabilize it so the sanding effort won't try and flop it over...














                  With that done, all our open holes are taped over and the entire bottom side masked off to protect the inside finish..








                  A bit of Evercoat 416 to address some lows, and 3 coats of SPI epoxy for the next round of blocking on the outside.








                  Blocking...





                  Some booth clean up and fresh masking on the table, hood pre-cleaned and tacked.....





                  Sealed with SPI Epoxy thinned about 10%





                  Fleet paint that was used originally on the truck, supplied by owner. Orange peel in a can..





                  2 coats of color, 2 coats of SPI Universal Clear...





                  Comment


                  • cliffrod
                    cliffrod commented
                    Editing a comment
                    Looks really great, Robert.

                • #39
                  Thanks Clint!!


                  This past Friday night we cut and buffed the F7 hood to get rid of some dust nibs, and Saturday morning Jared and I started to reassemble the hood. The horn wiring had some dry and cracking insulation sleeving, so it was replaced as well.








                  John stopped by mid morning and we got all the parts put back together and adjusted. Looks much better with the hood back on, John has been driving without one for a couple months.














                  All ready for the Tri-state Antique Truck Show this week in Clear Brook VA..

                  Comment


                  • #40
                    looking fantastic robert, attention to detail shows, hope the show goes well, thanks for posting
                    thanks neil

                    Comment


                    • #41
                      Truck looks great , too nice to use as a truck !

                      Comment

                      Working...
                      X