Announcement

Collapse
No announcement yet.

Henry J Gasser

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Henry J Gasser

    Click image for larger version

Name:	IMG_20180815_165721_170.jpg
Views:	54
Size:	160.1 KB
ID:	3085Click image for larger version

Name:	IMG_20180812_154721.jpg
Views:	52
Size:	1.67 MB
ID:	3087Click image for larger version

Name:	IMG_20180812_155021.jpg
Views:	53
Size:	1.65 MB
ID:	3086Click image for larger version

Name:	IMG_20180816_062123_126.jpg
Views:	53
Size:	98.4 KB
ID:	3084Click image for larger version

Name:	IMG_20180816_062123_125.jpg
Views:	91
Size:	89.8 KB
ID:	3083 Started with the hood. Luckily customer said it was good and did not need much work. About 4 hrs later... Ended up metal finishing out the dents and replacing a 4"×10" patch at the rear edge accessible once the rear hinge mount was removed.

  • #2
    Right fender was not too bad. Patch at bottom and a few dents. Click image for larger version

Name:	20180817_193113.jpg
Views:	53
Size:	3.00 MB
ID:	3089Click image for larger version

Name:	20180817_193120.jpg
Views:	52
Size:	3.08 MB
ID:	3090

    Comment


    • #3
      Left fender was not so lucky. Click image for larger version

Name:	IMG_20180817_193711_376.jpg
Views:	54
Size:	113.6 KB
ID:	3092Click image for larger version

Name:	IMG_20180818_053006.jpg
Views:	52
Size:	1.55 MB
ID:	3093Click image for larger version

Name:	IMG_20180819_060153_951.jpg
Views:	53
Size:	1.57 MB
ID:	3094Click image for larger version

Name:	IMG_20180819_172757_687.jpg
Views:	52
Size:	1.62 MB
ID:	3095 came out great. Forgot to take finied pics though.

      Comment


      • #4
        Click image for larger version  Name:	20180818_055612.jpg Views:	0 Size:	3.16 MB ID:	3097Click image for larger version  Name:	20180818_060149.jpg Views:	0 Size:	3.28 MB ID:	3098Click image for larger version  Name:	20180818_055210.jpg Views:	0 Size:	3.32 MB ID:	3099Click image for larger version  Name:	20180818_054641.jpg Views:	0 Size:	3.48 MB ID:	3100Click image for larger version  Name:	20180818_060039.jpg Views:	0 Size:	3.60 MB ID:	3101 Process of filling an antenna hole. Sorry backwards / out of order.

        Comment


        • #5
          Click image for larger version

Name:	20180818_060250.jpg
Views:	52
Size:	3.28 MB
ID:	3103Click image for larger version

Name:	20180818_062353.jpg
Views:	53
Size:	3.30 MB
ID:	3104 better

          Comment


          • #6
            Click image for larger version

Name:	20181124_052919.jpg
Views:	53
Size:	3.50 MB
ID:	3110Click image for larger version

Name:	20181124_052930.jpg
Views:	53
Size:	3.21 MB
ID:	3109Click image for larger version

Name:	20181124_052043.jpg
Views:	53
Size:	3.11 MB
ID:	3108Click image for larger version

Name:	20181124_052924.jpg
Views:	53
Size:	2.84 MB
ID:	3107Click image for larger version

Name:	20181122_074515.jpg
Views:	55
Size:	2.59 MB
ID:	3106 3 dents in the body according to the customer.

            Comment


            • #7
              Click image for larger version

Name:	20181209_065231.jpg
Views:	69
Size:	3.28 MB
ID:	3112Click image for larger version

Name:	20181209_065214.jpg
Views:	69
Size:	3.71 MB
ID:	3113Click image for larger version

Name:	20181209_065156.jpg
Views:	71
Size:	4.39 MB
ID:	3114Click image for larger version

Name:	20181209_064737.jpg
Views:	72
Size:	2.87 MB
ID:	3115Click image for larger version

Name:	20181209_065144.jpg
Views:	68
Size:	3.93 MB
ID:	3117
              Attached Files

              Comment


              • #8
                Click image for larger version

Name:	20181219_163950.jpg
Views:	56
Size:	3.45 MB
ID:	3124Click image for larger version

Name:	20181219_163932.jpg
Views:	55
Size:	3.33 MB
ID:	3122Click image for larger version

Name:	20181219_163938.jpg
Views:	56
Size:	3.29 MB
ID:	3121Click image for larger version

Name:	20181219_174535.jpg
Views:	54
Size:	3.44 MB
ID:	3123Click image for larger version

Name:	20181219_174621.jpg
Views:	56
Size:	3.03 MB
ID:	3120 finished and a couple coats of epoxy.

                Comment


                • #9
                  Click image for larger version

Name:	20190303_162915.jpg
Views:	57
Size:	1.10 MB
ID:	3126Click image for larger version

Name:	20190303_162936.jpg
Views:	56
Size:	977.3 KB
ID:	3127Click image for larger version

Name:	20190331_065551.jpg
Views:	57
Size:	2.94 MB
ID:	3128Click image for larger version

Name:	20190331_065558.jpg
Views:	56
Size:	3.25 MB
ID:	3129

                  Couple pics of the door skin in progress.
                  Attached Files

                  Comment


                  • #10
                    Click image for larger version

Name:	20190911_153636.jpg
Views:	56
Size:	2.16 MB
ID:	3137Click image for larger version

Name:	20190911_153623.jpg
Views:	55
Size:	2.12 MB
ID:	3136Click image for larger version

Name:	20191119_180942.jpg
Views:	54
Size:	2.04 MB
ID:	3135Click image for larger version

Name:	20191119_065614.jpg
Views:	56
Size:	2.06 MB
ID:	3134Click image for larger version

Name:	20191118_175556.jpg
Views:	56
Size:	1.10 MB
ID:	3133 no pic of the high build prime but this ista coat of eoxy over the high build then color and clear.

                    Comment


                    • #11
                      Couple pics 1 of just painted. Second of buffed couple pics of my 1st attempt at interior carpets. Click image for larger version

Name:	20191120_192511.jpg
Views:	57
Size:	1.54 MB
ID:	3139Click image for larger version

Name:	20191119_191128.jpg
Views:	55
Size:	1.68 MB
ID:	3140Click image for larger version

Name:	20191128_084351.jpg
Views:	54
Size:	2.72 MB
ID:	3141Click image for larger version

Name:	20191128_084340.jpg
Views:	56
Size:	2.68 MB
ID:	3142Click image for larger version

Name:	20191207_113021.jpg
Views:	55
Size:	2.72 MB
ID:	3143

                      Comment


                      • #12
                        Car will be back in a couple days. For radiused rear wheel wells, hood scoop final paint work.

                        Click image for larger version

Name:	20200402_120840.jpg
Views:	57
Size:	1.77 MB
ID:	3145Click image for larger version

Name:	20200402_120856.jpg
Views:	54
Size:	1.94 MB
ID:	3146Click image for larger version

Name:	20200402_120819.jpg
Views:	56
Size:	2.18 MB
ID:	3147Click image for larger version

Name:	20200402_121006.jpg
Views:	55
Size:	2.39 MB
ID:	3148Click image for larger version

Name:	20200402_121046.jpg
Views:	55
Size:	2.55 MB
ID:	3149

                        Still need to perfect the dies a bit but this will be the detail on the radiused wheel well...or something similar.

                        Comment


                        • #13
                          great work jay,

                          i like the ''3 dents'' the customer saw, looks like it should have been 30, thank you for posting


                          keep at it!...
                          thanks neil

                          Comment


                          • #14
                            Originally posted by neilb View Post
                            great work jay,

                            i like the ''3 dents'' the customer saw, looks like it should have been 30, thank you for posting


                            keep at it!...
                            Thanks Neil,
                            More like 300. Technically he was tight if you count the entire roof as one big dent. 🤣 Luckily the turret top on this car has almost no support. Couple inches of bracing along the sides, a little at the front above the windshield, around the rear window and a 3" horizontal strip which connects the bottom of the rear window to the 1/4s. So plenty of access.

                            This has been a fun project and I am looking forward to getting it back in the shop.


                            Comment


                            • #15
                              Hot damn, Jay. Thanks for the thread. It's looking great.

                              Comment

                              Working...
                              X